NIIT Lab@Home 5
ICTWC
1. New
laptop computers are being introduced for some of the managers in A. Datum
Corporation. You need to test how the IPv4 configuration will behave when the
managers are away from the office and a DHCP server is unavailable. Objectives
Modify the IPv4 settings for a LAN connection. Configure a LAN connection to
use DHCP.
For this lab, you will use the available virtual machine environment.
Before you begin the lab, you must
complete the following steps:
1. On the host computer, click Start, point to Administrative Tools, and then click Hyper-V Manager.
2. In Hyper-V® Manager, click 20687A-LON-DC1, and in the Actions pane, click Start.
3. In the Actions pane, click Connect. Wait until the virtual machine starts.
4. Log on using the following credentials:
o User name: Adatum\Administrator
o Password: Pa$$w0rd
5. Repeat steps 2-4 for 20687A-LON-CL1.
Enabling Automatic IPv4 Configuration
The main tasks for this exercise are as follows:
1. Verify the current IPv4 configuration.
2. Configure the computer to obtain an IPv4 address automatically.
3. Verify the new IPv4 configuration.
Task 1: Verify the current IPv4 configuration
1. Log on to LON-CL1 virtual machine as Adatum\Administrator with the password Pa$$w0rd.
2. Open a command prompt, and then run the command IPConfig /all.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o Is DHCP enabled?
Task 2: Configure the computer to obtain an IPv4 address automatically
1. Use Network and Sharing Center to view the properties of Local Area Connection.
2. Modify TCP/IPv4 to:
o Obtain an IP address automatically.
o Obtain a DNS server address automatically.
Task 3: Verify the new IPv4 configuration
• In the Local Area Connection Status window, view the Details.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o Is DHCP enabled?
o When does the DHCP lease expire?
Results: After this exercise, you will have configured LON-CL1 to obtain an IPv4 configuration
automatically from a DHCP server.
Configuring IPv4 Manually
The main tasks for this exercise are as follows:
1. Deactivate the DHCP scope.
2. Obtain a new IPv4 address.
3. Configure an alternate IPv4 address.
4. Configure a static IPv4 address.
Task 1: Deactivate the DHCP scope
1. Log on to LON-DC1 virtual machine as Adatum\Administrator with the password Pa$$w0rd.
2. Use the DHCP Administrative Tool to deactivate the IPv4 scope named A Datum Scope.
Task 2: Obtain a new IPv4 address
1. On LON-CL1, at the command prompt, run the command IPConfig /release.
2. Run the command IPConfig /renew.
3. Run the command IPConfig /all.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o What kind of address is this?
Task 3: Configure an alternate IPv4 address
1. In the properties for TCP/IPv4 for Local Area Connection, use the Alternate Configuration tab to
configure the following:
o IP address: 172.16.16.10
o Subnet mask: 255.255.0.0
o Preferred DNS server: 172.16.0.10
o Do not validate settings
2. At the command prompt, run the following commands:
o IPConfig /release
o IPConfig /renew
o IPConfig /all
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o What kind of address is this?
Task 4: Configure a static IPv4 address
1. In the Local Area Connection Status window, view the Properties.
2. In the properties for TCP/IPv4 for Local Area Connection, configure the following:
o IP address: 172.16.16.10
o Subnet mask: 255.255.0.0
o Preferred DNS server: 172.16.0.10
Results: After this exercise, you will have tested various scenarios for dynamic IP address assignment, and
then configured a static IP address.
complete the following steps:
1. On the host computer, click Start, point to Administrative Tools, and then click Hyper-V Manager.
2. In Hyper-V® Manager, click 20687A-LON-DC1, and in the Actions pane, click Start.
3. In the Actions pane, click Connect. Wait until the virtual machine starts.
4. Log on using the following credentials:
o User name: Adatum\Administrator
o Password: Pa$$w0rd
5. Repeat steps 2-4 for 20687A-LON-CL1.
Enabling Automatic IPv4 Configuration
The main tasks for this exercise are as follows:
1. Verify the current IPv4 configuration.
2. Configure the computer to obtain an IPv4 address automatically.
3. Verify the new IPv4 configuration.
Task 1: Verify the current IPv4 configuration
1. Log on to LON-CL1 virtual machine as Adatum\Administrator with the password Pa$$w0rd.
2. Open a command prompt, and then run the command IPConfig /all.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o Is DHCP enabled?
Task 2: Configure the computer to obtain an IPv4 address automatically
1. Use Network and Sharing Center to view the properties of Local Area Connection.
2. Modify TCP/IPv4 to:
o Obtain an IP address automatically.
o Obtain a DNS server address automatically.
Task 3: Verify the new IPv4 configuration
• In the Local Area Connection Status window, view the Details.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o Is DHCP enabled?
o When does the DHCP lease expire?
Results: After this exercise, you will have configured LON-CL1 to obtain an IPv4 configuration
automatically from a DHCP server.
Configuring IPv4 Manually
The main tasks for this exercise are as follows:
1. Deactivate the DHCP scope.
2. Obtain a new IPv4 address.
3. Configure an alternate IPv4 address.
4. Configure a static IPv4 address.
Task 1: Deactivate the DHCP scope
1. Log on to LON-DC1 virtual machine as Adatum\Administrator with the password Pa$$w0rd.
2. Use the DHCP Administrative Tool to deactivate the IPv4 scope named A Datum Scope.
Task 2: Obtain a new IPv4 address
1. On LON-CL1, at the command prompt, run the command IPConfig /release.
2. Run the command IPConfig /renew.
3. Run the command IPConfig /all.
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o What kind of address is this?
Task 3: Configure an alternate IPv4 address
1. In the properties for TCP/IPv4 for Local Area Connection, use the Alternate Configuration tab to
configure the following:
o IP address: 172.16.16.10
o Subnet mask: 255.255.0.0
o Preferred DNS server: 172.16.0.10
o Do not validate settings
2. At the command prompt, run the following commands:
o IPConfig /release
o IPConfig /renew
o IPConfig /all
o What is the current IPv4 address?
o What is the subnet mask?
o To which IPv4 network does this host belong?
o What kind of address is this?
Task 4: Configure a static IPv4 address
1. In the Local Area Connection Status window, view the Properties.
2. In the properties for TCP/IPv4 for Local Area Connection, configure the following:
o IP address: 172.16.16.10
o Subnet mask: 255.255.0.0
o Preferred DNS server: 172.16.0.10
Results: After this exercise, you will have tested various scenarios for dynamic IP address assignment, and
then configured a static IP address.
2. An intern has been unsuccessful in attempts to resolve a network
connectivity problem on a Windows 8 computer. The changes made to the computer
have not been documented. You need to restore network connectivity for the
computer. Objectives Create a simulated problem. Use Windows tools to determine
the cause of the problem. Resolve the problem.
Task 1: Create a simulated problem.
The main tasks for this exercise are as follows:
1. Verify connectivity to LON-DC1.
2. Simulate the problem.
3. Test connectivity to LON-DC1.
4. Gather information about the problem.
Verify connectivity to LON-DC1
• On LON-CL1, map the drive letter P to \\LON-DC1\Data.
Simulate the problem
1. In the properties of Local Area Connection, disable the IPv6 protocol.
2. Run the file E:\LabFiles\Mod04\ Mod4-Script.bat.
Test connectivity to LON-DC1
• Access drive letter P by using Windows Explorer. Are you able to access the mapped drive P:?
Gather information about the problem
1. Open a command prompt, and then run the following commands:
o ping lon-dc1
o ping 172.16.0.10
o IPConfig /all
2. What IP address is the computer using?
3. What subnet mask is the computer using?
4. What network is the computer on?
Task 3: Resolve the problem.
The main tasks for this exercise are as follows:
1. Resolve the first problem.
2. Test the first resolution.
3. Resolve the second problem.
4. Test the second resolution.
Resolve the first problem
• In the properties of Local Area Connection, modify TCP/IPv4 to use the subnet mask 255.255.0.0.
Test the first resolution
1. Access drive letter P by using Windows Explorer. Are you able to access mapped drive P:?
2. Open a command prompt, and at the command prompt, run the following commands :
o ping lon-dc1.
o ping 172.16.0.10.
o IPConfig /all.
What DNS servers is the computer using?
Resolve the second problem
• In the properties of Local Area Connection, modify TCP/IPv4 and use the preferred DNS server
172.16.0.10.
Test the second resolution
• Access drive letter P by using Windows Explorer. Are you able to access mapped drive P:?
Results: After this exercise, you will have resolved the connectivity problem between LON-CL1 and LONDC1.
To prepare for the next module
When you are finished the lab, revert the virtual machines to their initial state.
1. On the host computer, start Hyper-V Manager.
2. In the Virtual Machines list, right-click 20687A-LON-CL1, and then click Revert.
3. In the Revert Virtual Machine dialog box, click Revert.
4. Repeat steps 2 and 3 for 20687A-LON-DC1.
The main tasks for this exercise are as follows:
1. Verify connectivity to LON-DC1.
2. Simulate the problem.
3. Test connectivity to LON-DC1.
4. Gather information about the problem.
Verify connectivity to LON-DC1
• On LON-CL1, map the drive letter P to \\LON-DC1\Data.
Simulate the problem
1. In the properties of Local Area Connection, disable the IPv6 protocol.
2. Run the file E:\LabFiles\Mod04\ Mod4-Script.bat.
Test connectivity to LON-DC1
• Access drive letter P by using Windows Explorer. Are you able to access the mapped drive P:?
Gather information about the problem
1. Open a command prompt, and then run the following commands:
o ping lon-dc1
o ping 172.16.0.10
o IPConfig /all
2. What IP address is the computer using?
3. What subnet mask is the computer using?
4. What network is the computer on?
Task 3: Resolve the problem.
The main tasks for this exercise are as follows:
1. Resolve the first problem.
2. Test the first resolution.
3. Resolve the second problem.
4. Test the second resolution.
Resolve the first problem
• In the properties of Local Area Connection, modify TCP/IPv4 to use the subnet mask 255.255.0.0.
Test the first resolution
1. Access drive letter P by using Windows Explorer. Are you able to access mapped drive P:?
2. Open a command prompt, and at the command prompt, run the following commands :
o ping lon-dc1.
o ping 172.16.0.10.
o IPConfig /all.
What DNS servers is the computer using?
Resolve the second problem
• In the properties of Local Area Connection, modify TCP/IPv4 and use the preferred DNS server
172.16.0.10.
Test the second resolution
• Access drive letter P by using Windows Explorer. Are you able to access mapped drive P:?
Results: After this exercise, you will have resolved the connectivity problem between LON-CL1 and LONDC1.
To prepare for the next module
When you are finished the lab, revert the virtual machines to their initial state.
1. On the host computer, start Hyper-V Manager.
2. In the Virtual Machines list, right-click 20687A-LON-CL1, and then click Revert.
3. In the Revert Virtual Machine dialog box, click Revert.
4. Repeat steps 2 and 3 for 20687A-LON-DC1.
3. A. Datum Corporation is planning to implement a wireless network to
enable certain employees to connect their laptops to the corporate network.
Additionally, they would like to enable visitors to connect their laptops to a
restricted network that provides Internet access only. Objectives Create an
implementation plan for a wireless network. Troubleshoot issues arising from
the wireless deployment plan. Configure a wireless network policy.
Task 1:
implementation plan for a wireless network.
Holly Dickson is the IT manager at A. Datum, and you have been working with her on the wireless
networking project. Holly wants you to determine what you need to enable wireless access for employees
and visitors. The A. Datum offices take up the entirety of a small building that spans two floors, with the
employees mainly confined to the upper floor. The ground floor provides conferencing facilities and a
reception area. Holly has produced the A. Datum Wireless Network Requirements document. You must
consider each requirement, and then make a corresponding proposal that indicates how you will meet
that requirement.
Requirements Overview
I want to deploy wireless networks throughout the London offices.
Security is critical, and we must deploy the strongest security measures available.
Some of our older computer equipment supports earlier wireless standards only.
Cordless telephones are in use in some parts of the building.
We are located in a busy trading district, with other commercial organizations located nearby. Again, it
is important that our network is not compromised.
1. Read the A. Datum Wireless Network Requirements document.
2. Update the document with your proposed course of action.
Read the A. Datum Wireless Network Requirements document
• Read the “A. Datum Wireless Network Requirements” document.
Update the document with your proposed course of action
1. Answer the questions in the Additional Information section of the document.
Task 2: Determining the Cause of Wireless Network Problems
Holly has placed a call to you on the help desk. The A. Datum wireless network is a great success.
However, there have been some ongoing problems with intermittent connections. Additionally, some staff
members can connect to the A. Datum corporate network from the parking lot.
Note: Your instructor may run this exercise as a class discussion.
A. Datum Incident Record
Incident number: 501235
Date and time of call May 21 10:45am
User Holly Dickson
Incident Details
Intermittent connection problems from computers connecting to the wireless network.
Some users can connect to the wireless access points from the parking lot.
Plan of Action
The main tasks for this exercise are as follows:
1. Read help-desk incident record 501235.
2. Update the plan of action section of incident record 501235.
Read help-desk incident record 501235
• Read help-desk incident record 501235.
Update the plan of action section of incident record 501235
1. Answer the questions in the additional information section of the incident record.
Task 3: Configuring a Wireless Network Policy
In this exercise, you will configure a wireless network policy that supports the wireless network design that
you planned.
Group Policy Objects (GPOs) and implementing GPOs is discussed in Module 8:
Securing Windows 8 Desktops.
The main tasks for this exercise are as follows:
1. Open Group Policy Management Editor.
2. Create a wireless network policy.
Open Group Policy Management Editor
1. On LON-DC1, open Group Policy Management from the Start screen.
2. Under Forest: Adatum.com > Domains > Adatum.com, click Default Domain Policy.
3. Open the policy for editing.
Create a wireless network policy
1. Locate the Wireless Network (IEEE 802.11) Policies node under Computer Configuration >
Policies > Windows Settings > Security Settings.
2. Select the Create A New Wireless Network Policy for Windows Vista and Later Releases option.
3. Configure the policy with the following settings:
o Policy Name: A Datum Wireless Policy
o Profile Type: Infrastructure
o Profile Name: A Datum Wireless Profile
o Network Name(s) (SSID): A Datum 1, A Datum 2.
4. Configure the following security settings:
o Authentication: WPA2-Enterprise
o Encryption: AES
5. Confirm all your changes, and then close all open windows.
Holly Dickson is the IT manager at A. Datum, and you have been working with her on the wireless
networking project. Holly wants you to determine what you need to enable wireless access for employees
and visitors. The A. Datum offices take up the entirety of a small building that spans two floors, with the
employees mainly confined to the upper floor. The ground floor provides conferencing facilities and a
reception area. Holly has produced the A. Datum Wireless Network Requirements document. You must
consider each requirement, and then make a corresponding proposal that indicates how you will meet
that requirement.
Requirements Overview
I want to deploy wireless networks throughout the London offices.
Security is critical, and we must deploy the strongest security measures available.
Some of our older computer equipment supports earlier wireless standards only.
Cordless telephones are in use in some parts of the building.
We are located in a busy trading district, with other commercial organizations located nearby. Again, it
is important that our network is not compromised.
1. Read the A. Datum Wireless Network Requirements document.
2. Update the document with your proposed course of action.
Read the A. Datum Wireless Network Requirements document
• Read the “A. Datum Wireless Network Requirements” document.
Update the document with your proposed course of action
1. Answer the questions in the Additional Information section of the document.
Task 2: Determining the Cause of Wireless Network Problems
Holly has placed a call to you on the help desk. The A. Datum wireless network is a great success.
However, there have been some ongoing problems with intermittent connections. Additionally, some staff
members can connect to the A. Datum corporate network from the parking lot.
Note: Your instructor may run this exercise as a class discussion.
A. Datum Incident Record
Incident number: 501235
Date and time of call May 21 10:45am
User Holly Dickson
Incident Details
Intermittent connection problems from computers connecting to the wireless network.
Some users can connect to the wireless access points from the parking lot.
Plan of Action
The main tasks for this exercise are as follows:
1. Read help-desk incident record 501235.
2. Update the plan of action section of incident record 501235.
Read help-desk incident record 501235
• Read help-desk incident record 501235.
Update the plan of action section of incident record 501235
1. Answer the questions in the additional information section of the incident record.
Task 3: Configuring a Wireless Network Policy
In this exercise, you will configure a wireless network policy that supports the wireless network design that
you planned.
Group Policy Objects (GPOs) and implementing GPOs is discussed in Module 8:
Securing Windows 8 Desktops.
The main tasks for this exercise are as follows:
1. Open Group Policy Management Editor.
2. Create a wireless network policy.
Open Group Policy Management Editor
1. On LON-DC1, open Group Policy Management from the Start screen.
2. Under Forest: Adatum.com > Domains > Adatum.com, click Default Domain Policy.
3. Open the policy for editing.
Create a wireless network policy
1. Locate the Wireless Network (IEEE 802.11) Policies node under Computer Configuration >
Policies > Windows Settings > Security Settings.
2. Select the Create A New Wireless Network Policy for Windows Vista and Later Releases option.
3. Configure the policy with the following settings:
o Policy Name: A Datum Wireless Policy
o Profile Type: Infrastructure
o Profile Name: A Datum Wireless Profile
o Network Name(s) (SSID): A Datum 1, A Datum 2.
4. Configure the following security settings:
o Authentication: WPA2-Enterprise
o Encryption: AES
5. Confirm all your changes, and then close all open windows.
No comments:
Post a Comment